Taurus TX22 Forced Reset Trigger (FRT) | Cicada Research

The Cicada Research Fang is a stainless-steel Taurus TX22 FRT designed for reliable fitment, long-term durability, and a smooth forced reset. This component replaces the factory disconnector and uses movement of the slide to force the trigger forward and reset it after each shot. Each shot still requires a separate function of the trigger.

Manufactured and finished by Cicada Research in the USA, this Taurus TX22 forced reset trigger uses the publicly released ODD MFG V7 geometry. Every part goes through a two-stage finishing process to remove burrs, soften sharp edges, reduce friction, and minimize unnecessary contact with the striker block.

Taurus TX22 FRT Features

• Stainless-steel construction: More durable than earlier polymer TX22 FRT designs.
• ODD MFG V7 geometry: Developed to address tolerance-stacking, fitment, and durability problems found in older designs.
• Two-stage finishing process: Ceramic-deburred and polished with stainless-steel pins.
• Low-friction finish: Smooth edges help reduce binding and unnecessary component wear.
• Drop-in-style disconnector replacement: No permanent modification to the pistol is intended.
• One FRT per package: This listing is for one stainless-steel TX22 FRT.
• Lifetime warranty: Backed directly by Cicada Research.
• Free U.S. shipping: No minimum order required.
• Compatible performance upgrade available: Pair the FRT with the Tombstone 1.5 oz TX22 weighted backplate and rate reducer to slow the cyclic rate and/or improve reliability when using a suppressor.

What Does a Taurus TX22 Forced Reset Trigger Do?

A forced reset trigger, commonly called an FRT, uses the cycling action of the firearm to mechanically push the trigger forward into the reset position. On the Taurus TX22, this FRT replaces the factory disconnector inside the trigger assembly.

When the slide cycles, the FRT forces the trigger forward so it can be activated again. The firearm remains mechanically dependent on a separate trigger function for every shot. This design allows faster and more consistent follow-up shots without changing the basic operating action of the Taurus TX22.

Why TX22 FRT Geometry Matters

There are numerous TX22 FRT shapes and files in circulation, and they do not all perform the same. The two most important factors are geometry and finish.

Incorrect geometry can create tolerance-stacking problems, inconsistent reset, poor fitment, or excessive contact with the striker block. Roughly cut metal parts can also retain burrs and sharp edges that increase friction and unnecessary wear.

The ODD MFG V7 geometry was developed to improve fitment and reduce the excessive striker-block contact associated with some older metal FRT designs. Cicada Research uses this publicly released geometry and concentrates on producing a properly finished, installation-ready component.

Two-Stage Stainless-Steel Finishing Process

Each Cicada Research TX22 FRT goes through two separate finishing stages:

1. Ceramic deburring: The components are tumbled in ceramic media to remove cutting burrs and soften sharp edges.
2. Stainless-pin polishing: The parts are then polished with stainless-steel pins to create a smoother, lower-friction surface.

This process is intended to produce a cleaner component than an unfinished or roughly cut FRT. Proper finishing helps the part move smoothly and reduces unnecessary friction inside the trigger assembly.

TX22 Compatibility and Fitment

This FRT has been tested for consistent fitment across a wide range of Taurus TX22 pistols. Taurus has produced multiple TX22 models and generations, and manufacturing tolerances can vary between individual pistols.

Compatible with Taurus TX22, TX22 Gen 2, TX22 Compact, TX22 Competition, and TX22 T.O.R.O. models and generations.

Installation Video

Watch the Cicada Research stainless-steel TX22 FRT installation video before installing the component. If you are not comfortable working with the trigger assembly, have the part installed and function-checked by a qualified professional.

Pair It With the Tombstone TX22 Rate Reducer

For shooters seeking a slower, more controllable cyclic rate, the stainless-steel FRT can be paired with the Cicada Research Tombstone TX22 weighted backplate and rate reducer.

The Tombstone adds 1.5 ounces of reciprocating weight to the TX22 slide assembly. This additional mass slows slide movement and can improve reliability in forced-reset mode, particularly when running suppressors, certain ammunition, or configurations without the additional weight of an optic.

The Tombstone is CNC-machined from steel, professionally nitrided for corrosion and wear resistance, and threaded to accept optional charging-handle attachments. It is compatible with all TX22 models, although extremely light Competition configurations may benefit from a heavier recoil spring.

View the Tombstone 1.5 oz TX22 Rate Reducer →

Expected Wear and Maintenance

No metal-on-metal trigger component is completely wear-free. Some rounding or contact wear can develop inside the striker block over time. Similar contact can also occur with the factory disconnector.

The V7 geometry and two-stage finishing process are intended to reduce unnecessary wear, but they cannot eliminate all contact. A light trigger finger is recommended. Inspect the FRT, striker block, and related components regularly, and stop using the product if you observe abnormal wear, damage, or inconsistent operation.

What Is Included?

• One stainless-steel Cicada Research Taurus TX22 FRT
  
• Cicada Research lifetime warranty
  

This is a one-pack. Earlier Cicada Research polymer FRTs were offered in five-packs, but this stainless-steel product is sold individually.

Lifetime Warranty

This product is covered by the Cicada Research lifetime warranty. If you experience a manufacturing or fitment problem, contact us before modifying the component. We will work with you to diagnose the issue and determine the appropriate replacement or warranty solution.

Frequently Asked Questions

Is this TX22 FRT made from polymer?

No. This version is manufactured from stainless steel and replaces the earlier polymer version previously sold by Cicada Research.

Is this a five-pack?

No. This listing includes one stainless-steel Taurus TX22 FRT.

Does the FRT require permanent modification?

The component is designed as a replacement for the factory disconnector, without permanent modification to the pistol. Individual firearm tolerances can vary, so proper fit and operation must always be verified after installation.

Will a stainless-steel FRT cause wear?

Some metal-on-metal contact and normal wear can occur. The V7 geometry and Cicada Research finishing process are intended to reduce unnecessary contact and eliminate the sharp burrs found on unfinished components, but no metal FRT should be described as completely wear-free. I have reports of over 4000 rounds without failure.

Is Cicada Research affiliated with ODD MFG?

No. This product is manufactured and finished by Cicada Research using the publicly released ODD MFG TX22 FRT V7 design. Cicada Research is not affiliated with or endorsed by ODD MFG LLC.

Safety Warning

By purchasing, installing, or using the Cicada Research TX22 FRT, the user accepts responsibility for proper installation, inspection, function testing, and safe operation. Improper installation or use may result in an accidental discharge, firearm damage, serious injury, or death.

Always confirm that the firearm is completely unloaded before installation, inspection, or maintenance. If the trigger does not operate correctly during an unloaded function check, stop immediately and contact Cicada Research or a qualified professional. The user assumes responsibility for damage, wear, malfunction, and compliance with applicable laws.

Shipping Restrictions

This product cannot currently be shipped to the following locations:

California; Colorado within Boulder County and Broomfield; Connecticut; Washington, D.C.; Delaware; Florida; Hawaii; Illinois; Massachusetts; Maryland; Minnesota; New Jersey; Nevada; New York; Oregon; Rhode Island; and Vermont.

Orders placed for restricted destinations that must be canceled are subject to a 10% restocking fee. Restrictions can change, and customers are responsible for confirming that purchase, possession, installation, and use are permitted under their state and local laws.

Trademark and Design Notice

All trademarks, product names, and company names referenced on this page belong to their respective owners and are used only to identify product compatibility. Cicada Research is not affiliated with or endorsed by Taurus, ODD MFG LLC, or any other company mentioned on this page.